Description
Solvent free, water based contact adhesive for the interior installation of cork tiles on porous and non-porous subfloors and to permanently adhered, non-cushioned, clean, existing floor coverings.
Coverage : 2.5kg approx 12m² ; 5kg approx 25m²
Special Features:
·Extra long working time
·High initial strength
·Can be walked on immediately
Flash time:
Water before adhesive cures
Pot life:
Loba microfibre roller # 120
Coverage:
1 gal. covers 180 sq. ft. when covering both the tile and the floor
Climate conditions at work site:
60 °F / 15 °C to 75 °F / 24 °C, 40 % to 65 % relative humidity
Open time:
30 to 45 minutes, depending on climate conditions and absorbency of substrates, allow adhesive to dry until it is clear
Working time:
2 to 3 hours; when installing precoated tiles working time is reduced to 1 to 1,5 hours
Curing time:
Curing takes 24 hours, light traffic allowed immediately after installation
Storage information:
1 year in unopened container at 70 °F / 23 °C
Base:
Synthetic polymers and latex
EMICODE:
EC1 PLUS
